A water level meter that uses ultrasonic waves
IMP 3 / IMP 6 / IMP 10
Manufacturer: Pulsar
A water level meter that uses ultrasonic waves
IMP 3 / IMP 6 / IMP 10
MODEL | IMP 3 | IMP 6 | IMP 10 |
---|---|---|---|
Size | 175mm overall height x 130mm diameter, 1Kg | ||
Installation | 1.5” (3m and 6m range versions), 2” (10m version) universal thread – Suits BSP and NPT, parallel and tapered |
||
Temperature range | -40 ~ 85℃ | ||
Protection grade | IP65 | ||
Beam angle | 10˚ | 10˚ | 10˚ |
Measured frequency | 125kHz | 75kHz | 75kHz |
Data storage | 0.2~3m | 0.3~6m | 0.3~10m |
Power supply | 11-30V, 3.5-22mA | ||
Precision | ±0.25% or 6mm | ||
Resolution | ±0.1% or 2mm | ||
Output | 4 ~ 20mA | ||
Temperature compensation |
±0.5℃ Accuracy | ||
2–wire | - RS232(RJ11 port) connection for diagnostics and software updates - 4 digit LCD display - 4 button keypad for parameter entry - Poser consumption: 3.5 – 22mA - Passive 4-20mA output |
||
3–wire | - Including 2-wire specifications - Backlit LCD display - 0-10V analogue output - 2 relays: single pole two way, 1A 30VDC/AC - Power consumption with relays energized <60mA (less12mA/relay not energized) - Active and passive 4-20mA output |
||
Explosion-proof grade |
Intrinsically safe to ATEX EEx ia IIc T4 and IECEx. NB : I.S. IMP is identified by Black cap to housing instead of green. Does not include RS232 interface. | ||
PC Interface | All parameters can be accessed and changed through IMP PC software. Echo traces may be viewed on screen. NB: IMP I.S. does not offer this feature. |